| Model: | PWR-4450-AC – ISR Router Power Supply |
| Detail: | 450W AC Power Supply for Cisco ISR 4450 |
450W AC Power Supply for Cisco ISR 4450
| Model: | PWR-4450-AC – ISR Router Power Supply |
| Detail: | 450W AC Power Supply for Cisco ISR 4450 |
450W AC Power Supply for Cisco ISR 4450
Cisco Network Module for Cisco 3850 Series Switches
C3850-NM-4-10G is a network module that serve Cisco Catalyst 3850 Series Switches.
| Products/Slots | C3850-NM-4-1G | C3850-NM-2-10G | C3850-NM-4-10G |
| Slot 1 | 1-Gigabit SFP module | 1-Gigabit SFP module | 10-Gigabit SFP module |
| Slot 2 | 1-Gigabit SFP module | 1-Gigabit SFP module | 10-Gigabit SFP module |
| Slot 3 | 1-Gigabit SFP module |
|
10-Gigabit SFP module |
| Slot 4 | 1-Gigabit SFP module |
|
10-Gigabit SFP module |
Cisco 3850 Series Power Supply PWR-C1-715WAC 715W AC Config 1 Power Supply for 3850 Series.
| Product Code | PWR-C1-715WAC= |
| Power supply rated maximum | 715W |
| Total output BTU (Note: 1000 BTU/hr = 293W) | 2465 BTU/hr, 715W |
| Input-voltage range and frequency | 100-240VAC,
50-60 Hz |
| Input current | 10-5A |
| Output ratings | -56V at 12.8A |
| Output holdup time | 16.7 ms minimum at 100VAC |
| Power-supply input receptacles | IEC 320-C16
(IEC60320-C16) |
| Power cord rating | 13A |
| Physical specifications | (H x W x D): 1.58 X 3.25 X 12.20 in
Weight: 2.8 lb (1.3 kg) |
| Model: | GLC-SX-MM GE SFP, LC connector SX transceiver |
| Detail: | GE SFP, LC connector SX transceiver |
1000BASE-SX SFP for Multimode Fiber Only
The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.
| Product Code | GLC-SX-MM |
| Connector Type: | LC multi-mode |
| Cabling Type: | Ethernet 1000Base-SX |
| Compliant Standards: | IEEE 802.3z |
| Connectivity Technology: | Wired |
| Data Link Protocol: | Gigabit Ethernet |
| Data Transfer Rate: | 1 Gbps |
| Features: | Full duplex capability , Hot swap module replacement |
| Form Factor: | Plug-in module |
| Max Transfer Distance: | 1800 ft |
| Optical Wave Length: | 850 nm |
| Networking Type: | SFP (mini-GBIC) transceiver module |
Cisco® Gigabit Ethernet WAN Module NIM-2GE-CU-SFP brings high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers.
Cisco PWR-C1-1100WAC 
Cisco PWR-C1-1100WAC-P 
Cisco NIM-2T 
There are no reviews yet.