PWR-C1-1100WAC-P
| Model: | PWR-C1-1100WAC-P= – Catalyst 3850 Switch Power Supply |
| Detail: | 1100W AC 80+ platinum Config 1 Power Supply Spare |
Based on 0 reviews
Be the first to review “Cisco PWR-C1-1100WAC-P”
Related products
-
Modules
Cisco NIM-4FXS
Cisco NIM-4FXS
NIM-4FXS is a Cisco 4-Port Network Interface Module – FXS. FXS-E and DID, for ISR4451-X. The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.
The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.
SKU: Cisco NIM-4FXS -
Modules
Cisco GLC-SX-MM-RGD
GLC-SX-MM-RGD
Model: GLC-SX-MM-RGD Cisco SFP Detail: Cisco GLC-SX-MM-RGD 1000Mbps Multi-Mode Rugged SFP The GLC-SX-MM-RGD is a third-party compatible SFP for Cisco. This 1000BASE module will reach 550m / 1km and uses a wavelength of 850nm. All GLC-SX-MM-RGD are in-system tested in real Cisco routers and switches.
Product Name GLC-SX-MM-RGD Media Fiber Wavelength 550m / 1km Data Rage OC48 Mode LC Connector Type MM Distance 850nm Operating Temperature 0° to 70°C (32° to 158°F) SKU: GLC-SX-MM-RGD -
Modules
Cisco PWR-C1-715WAC-P
Cisco 3850 Series Power Supply PWR-C1-715WAC 715W AC Config 1 Power Supply for 3850 Series.
Product Code PWR-C1-715WAC= Power supply rated maximum 715W Total output BTU (Note: 1000 BTU/hr = 293W) 2465 BTU/hr, 715W Input-voltage range and frequency 100-240VAC, 50-60 Hz
Input current 10-5A Output ratings -56V at 12.8A Output holdup time 16.7 ms minimum at 100VAC Power-supply input receptacles IEC 320-C16 (IEC60320-C16)
Power cord rating 13A Physical specifications (H x W x D): 1.58 X 3.25 X 12.20 in Weight: 2.8 lb
(1.3 kg)
SKU: PWR-C1-715WAC -
Modules
Cisco GLC-LH-SM
GLC-LH-SM
Model: GLC-LH-SM GE SFP, LC connector LX/LH transceiver Detail: GE SFP, LC connector LX/LH transceiver GLC-LH-SM is the 1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers. The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable.
Product Wavelength (nm) Fiber Type Core Size (μm) Modal Bandwidth (MHz* Km) Operating Distance (m) 1000BASE-LX/LH 1310 MMF 62.5 500 550 (1,804 ft) 50 400 550 (1,804 ft) 50 500 550 (1,804 ft) SMF – – 10,000 (32,821 ft) SKU: GLC-LH-SM
There are no reviews yet.