Cisco GLC-BX-U
GLC-BX-U
| Model: | GLC-BX-U 1000BASE-BX SFP, 1310NM |
| Detail: | 1000BASE-BX SFP, 1310NM |
Cisco GLC-BX-U is a 1000BASE-BX SFP, 1310NM.
| Model | Description |
| GLC-BX-U | 1000BASE-BX SFP, 1310NM |
GLC-BX-U
| Model: | GLC-BX-U 1000BASE-BX SFP, 1310NM |
| Detail: | 1000BASE-BX SFP, 1310NM |
Cisco GLC-BX-U is a 1000BASE-BX SFP, 1310NM.
| Model | Description |
| GLC-BX-U | 1000BASE-BX SFP, 1310NM |
Based on 0 reviews
Be the first to review “Cisco GLC-BX-U”
Related products
-
Modules
Cisco NIM-1GE-CU-SFP
Cisco NIM-1GE-CU-SFP
Cisco® Gigabit Ethernet WAN Module NIM-1GE-CU-SFP brings high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers.
SKU: Cisco NIM-1GE-CU-SFP -
Modules
Cisco GLC-LH-SMD
Cisco GLC-LH-SMD
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP is made for Both Multimode and Single-Mode Fibers.
The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. 1300-nm wavelength, extended operating temperature range and DOM support, dual LC/PC connector.
SKU: Cisco-GLC-LH-SMD -
Modules
Cisco NIM-4FXS
Cisco NIM-4FXS
NIM-4FXS is a Cisco 4-Port Network Interface Module – FXS. FXS-E and DID, for ISR4451-X. The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.
The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.
SKU: Cisco NIM-4FXS
There are no reviews yet.