Modules
Showing 25–48 of 54 results
-
Modules
Cisco NIM-1GE-CU-SFP
Cisco NIM-1GE-CU-SFP
Cisco® Gigabit Ethernet WAN Module NIM-1GE-CU-SFP brings high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers.
SKU: Cisco NIM-1GE-CU-SFP -
Modules
Cisco NIM-2GE-CU-SFP
Cisco NIM-2GE-CU-SFP
Cisco® Gigabit Ethernet WAN Module NIM-2GE-CU-SFP brings high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules accelerate applications such as Ethernet WAN access, inter-VLAN routing, and high-speed connectivity to LAN switches and servers.
SKU: Cisco NIM-2GE-CU-SFP -
Modules
Cisco NIM-2T
Cisco NIM-2T
The Cisco Gigabit Ethernet High-Speed WAN Interface Card (HWIC) brings Gigabit Ethernet connectivity to Cisco Integrated Services Routers routers to accelerate applications such as Metro Ethernet access, inter-VLAN routing, and high-speed connectivity to LAN switches.The single-port Cisco Gigabit Ethernet HWIC provides Gigabit Ethernet optical and copper connectivity in a compact form factor for all Cisco Integrated Service Routers (ISRs).
SKU: Cisco NIM-2T -
Modules
Cisco NIM-4FXS
Cisco NIM-4FXS
NIM-4FXS is a Cisco 4-Port Network Interface Module – FXS. FXS-E and DID, for ISR4451-X. The Cisco® 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules.
The available modules include 2-port and 4-port foreign exchange station (FXS), direct inward dial (DID), foreign exchange office (FXO), a combination of 2-port FXS and 4-port FXO, 4-port ear and mouth (E/M), and 2-port and 4-port basic rate interface (BRI). The BRI cards support only voice features. The NIMs have a dedicated digital signal processor (DSP) that will be used for time-division multiplexing (TDM) analog voice services.
SKU: Cisco NIM-4FXS -
Modules
Cisco NIM-4T
NIM-4T=
- Supports RS-232, RS-449, RS-530, V.35, X.21, RS-530A Networking
- Data Transfer Speeds up to 8Mbps
Cisco 4400 Series Integrated Services Router Network Interface Modules (ISRNIMs) provide highly reliable synchronous serial WAN connections for remote sites. These interfaces use well-known point-to-point WAN protocols such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP) as well as Frame Relay, offering cost-effective virtualized WAN connections in both point-to-point and point-to-multipoint designs. You can mix and match NIMs to tailor cost-effective solutions for common networking solutions for low- and high-density WAN aggregation.
SKU: NIM-4T -
Modules
Cisco NIM-ES2-8-P
Cisco NIM-ES2-8-P
The 8-port Cisco® Gigabit Ethernet LAN Switch Network Interface Module (NIMs) NIM-ES2-8-P can reduce your company’s total cost of ownership (TCO) by integrating Gigabit Ethernet switch ports within Cisco 4000 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized businesses and enterprise branch offices a combination of switching and routing integrated into a single device.
SKU: Cisco NIM-ES2-8-P -
Modules
Cisco PVDM4-128
PVDM4-128
Model: PVDM4-128 Router Voice DSP Module Detail: 128-channel high-density voice and video DSP module The Cisco® Packet Voice Digital Signal Processor Modules (PVDMs) enables Cisco 4000 Series Integrated Services Routers (ISRs) to provide rich-media capabilities such as high-density voice connectivity, conferencing, transcoding, media optimization, transrating, and secure voice for Cisco Unified Communications solutions. These new modules support an unprecedented scale while allowing for a smaller solution footprint than ever before.
Features and Benefits
The PVDMs support digital voice connections, conferencing, universal transcoding, and media optimization services:
● T1/E1 voice: One of the primary uses of PVDMs is to packetize digital voice into IP packets to enable time-division multiplexing (TDM) digital voice applications.
● Conferencing: PVDM modules support ad hoc and meet-me conferencing with various codecs in conjunction with Cisco Unified Communications Manager and Cisco Unified Communications Manager Express.
● Universal transcoding: In conjunction with Cisco IOS® Software, the PVDMs support universal transcoding, which allows conversion from any supported codec to any other supported codec.
● Transrating: The PVDMs support transrating, in which the same codec is repacketized in order to connect dissimilar networks that have different codec packetization periods.
● Voice-quality management: The PVDMs perform compression, voice-activity detection, jitter management, and echo cancellation. The echo cancellation offered in the PVDMs has a tail length of 128 milliseconds and complies with ITU-T G.168.
● Energy savings: The motherboard PVDMs (PVDM4s) offer multiple power-saving modes, including a power-saver mode when the module is not in use. In power-saver mode, each PVDM4 can save up to 5 watts of power.
The analog voice modules (FXS, FXO, and E/M) and Basic Rate Interface (BRI) digital voice modules for the 4000 Series ISRs contain built-in, nonconfigurable digital signal processors (DSPs) and do not require any additional PVDMs for voice packetization.
Product Code PVDM4-128 Slot On-board motherboard or T1/E1 module slot Description 128-channel high-density voice DSP module Low Complexity 128 Medium Complexity 96 High Complexity 64 SKU: PVDM4-128 -
Modules
Cisco PWR-4320-AC
PWR-4320-AC=
Get efficient power supply for your Cisco Integrated Service Routers with the Cisco Power Supply. This external AC power supply operates at a voltage of 100 – 240 volts.
Product PWR-4320-AC= Product Description AC Power Supply for Cisco ISR 4320. Service Category C SKU: PWR-4320-AC -
Modules
Cisco PWR-4330-AC
PWR-4330-AC=
- Cisco
- PWR-4330-AC=
- Network Security
Product Dimensions 12.44 x 9.31 x 4 inches Item Weight 2.64 pounds ASIN B00WBXGA1W Item model number PWR-4330-AC= Best Sellers Rank #72,677 in TV Accessories #302,286 in Audio & Video Accessories
Is Discontinued By Manufacturer No Date First Available December 26, 2014 Manufacturer CISCO SYSTEMS – ENTERPRISE SKU: PWR-4330-AC -
Modules
Cisco PWR-C1-715WAC-P
Cisco 3850 Series Power Supply PWR-C1-715WAC 715W AC Config 1 Power Supply for 3850 Series.
Product Code PWR-C1-715WAC= Power supply rated maximum 715W Total output BTU (Note: 1000 BTU/hr = 293W) 2465 BTU/hr, 715W Input-voltage range and frequency 100-240VAC, 50-60 Hz
Input current 10-5A Output ratings -56V at 12.8A Output holdup time 16.7 ms minimum at 100VAC Power-supply input receptacles IEC 320-C16 (IEC60320-C16)
Power cord rating 13A Physical specifications (H x W x D): 1.58 X 3.25 X 12.20 in Weight: 2.8 lb
(1.3 kg)
SKU: PWR-C1-715WAC -
Modules
Cisco SFP-10G-ER
Cisco SFP-10G-ER
Model: SFP-10G-ER – Cisco SFP GLC Module Detail: Cisco 10GBASE-ER SFP+ Module for SMF SFP-10G-ER is the Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652).
Cisco SFP+ SFP-10G-ER Wavelength (nm) 1550 Cable Type SMF Core Size (Microns) G.652 Modal Bandwidth (MHz*km) – Cable Distance 40km SKU: Cisco SFP-10G-ER -
Modules
Cisco SFP-10G-LR-X
Cisco SFP-10G-LR-X
Model Number: SFP-10G-LR-X
Form Factor: SFP+
Date Rate: 10.3Gbps
Wavelength: 1310nm
Power Budget: 7dB
Max Reach Distance: 10km
Transmit Power: -6~-0.5dBm
Receive Sensitivity: -15dBm
Voltage: 3.3V
Power Consumption: 1W
Connector: Dual LC
Fiber Type: SMF
Operation Temperature: -5 to 85 °C
DDMI: With
SKU: Cisco SFP-10G-LR-X -
Modules
Cisco SFP-10G-LRM
SFP-10G-LRM
Model: SFP-10G-LRM 10GBASE-LRM SFP Module Detail: 10GBASE-LRM SFP Module Cisco 10GBASE-LRM SFP+ transceiver module for MMF and SMF, 1310-nm wavelength, 220m, LC duplex connector.
Product Code SFP-10G-LRM Device Type Plug-in module Form Factor SFP+ Date Rate 10.3Gbps Wavelength 1310nm Power Budget 3.4dB Max Reach Distance 220m Transmit Power -6.5~0.5dBm Receive Sensitivity -12dBm Voltage 3.3V Power Consumption 1W Connector Dual LC Fiber Type MMF Operation Temperature 0~70° C DDMI With Application 10 Gigabit Ethernet SKU: SFP-10G-LRM
