PWR-4450-AC
| Model: | PWR-4450-AC – ISR Router Power Supply |
| Detail: | 450W AC Power Supply for Cisco ISR 4450 |
450W AC Power Supply for Cisco ISR 4450
| Model: | PWR-4450-AC – ISR Router Power Supply |
| Detail: | 450W AC Power Supply for Cisco ISR 4450 |
450W AC Power Supply for Cisco ISR 4450
| Model: | PWR-4450-AC – ISR Router Power Supply |
| Detail: | 450W AC Power Supply for Cisco ISR 4450 |
450W AC Power Supply for Cisco ISR 4450
Cisco 3850 Series Network Module C3850-NM-2-40G 2 x 40GE Network Module
C3850-NM-2-40G Specification |
|
| General | |
| Device Type | Expansion module |
| Form Factor | Plug-in module |
| Networking | |
| Connectivity Technology | Wired |
| Data Link Protocol | 40 Gigabit LAN |
| Data Transfer Rate | 40 Gbps |
| Status Indicators | Port status |
| Expansion / Connectivity | |
| Interfaces | 2 – QSFP+ |
| Dimensions & Weight | |
| Weight | 9.88 oz |
| Compatibility Information | |
| Designed For | Cisco Catalyst 3850-24XS-E, 3850-24XS-S, 3850-24XU-E, C3850-24XU-S |
Cisco 3850 Series Power Supply PWR-C1-715WAC 715W AC Config 1 Power Supply for 3850 Series.
| Product Code | PWR-C1-715WAC= |
| Power supply rated maximum | 715W |
| Total output BTU (Note: 1000 BTU/hr = 293W) | 2465 BTU/hr, 715W |
| Input-voltage range and frequency | 100-240VAC,
50-60 Hz |
| Input current | 10-5A |
| Output ratings | -56V at 12.8A |
| Output holdup time | 16.7 ms minimum at 100VAC |
| Power-supply input receptacles | IEC 320-C16
(IEC60320-C16) |
| Power cord rating | 13A |
| Physical specifications | (H x W x D): 1.58 X 3.25 X 12.20 in
Weight: 2.8 lb (1.3 kg) |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP is made for Both Multimode and Single-Mode Fibers.
The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. 1300-nm wavelength, extended operating temperature range and DOM support, dual LC/PC connector.
The 8-port Cisco® Gigabit Ethernet LAN Switch Network Interface Module (NIMs) NIM-ES2-8-P can reduce your company’s total cost of ownership (TCO) by integrating Gigabit Ethernet switch ports within Cisco 4000 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized businesses and enterprise branch offices a combination of switching and routing integrated into a single device.

There are no reviews yet.